ANTENG 20FT A-Frame Glamping Cabin

Discover a 20ft A-frame glamping cabin with a glazed front and an optional loft. Designed for forest retreats and lakeside stays.

  • Item No.A-shaped triangular house,
Get a Quote
Quote within 12hFactory direct
ANTENGRESORT CABINS Get a quote

ANTENG RESORT COLLECTION

Folding Triangle House

20FT FOLDING RESORT CABIN

A glazed gable, warm timber finishes and a folding structure for boutique resorts, forest retreats and waterfront stays.

Forest resort cabin at dusk
01FOREST RETREAT / CONCEPT RENDER
Model
20 FT
External dimensions · W × L × H
2.60 × 5.90 × 3.88 m
Reference gross weight
2,500 kg
Folding assemblies
07 pieces

01 / ARCHITECTURE & INTERIOR

A guest suite with a view.

The glazed gable frames the landscape. Warm wood finishes and layered lighting define the guest suite, with room to plan a kitchenette, bathroom and loft.

Coastal cabin at sunset

Folding Triangle House Independently Designed First Factory to Design This Model

01Coastal retreat · Exterior concept
Signature gable

Full-height glazing frames the view from the main room.

Outdoor deck

Deck and railing options can be discussed for your site.

Loft beneath the roof

Plan an upper nook with stairs and a guardrail.

Timber bedroom and loft
02Guest suite and loft · Interior concept
Guest suite bathroom
03Guest bathroom · Interior concept

SITE CONCEPTS

From private cabins to resort clusters.

Single cabin by a wooded lakeshore
01Woodland lakeside cabin
Three cabins on the water in autumn
02Autumn waterfront cabins
Lakeside resort cluster at dusk
03Lakeside resort at dusk

02 / FOLDING SYSTEM

The seven-piece folding system.

The base, four walls and two roof panels form the main folding system. The walls unfold into position before the roof panels are raised and the ridge is closed and sealed.

Roof and envelope illustration
FIG. 01Roof and envelope · Reference illustration

Roof and wall construction

The reference envelope combines aluminum-magnesium-manganese alloy cladding, 50 mm PIR insulation and an interior finish over a steel frame.

See the roof assembly sequence

INSTALLATION / STEPS 09–12

From folded roof to finished ridge.

  1. 09Secure the front and rear wall panels.
  2. 10Prepare the folded triangular roof.
  3. 11Unfold the triangular roof.
  4. 12Fasten the roof to the wall panels and install the ridge cap.

SHIPPING / 40HQ

4 units per 40HQ

Reference loading arrangement for the 20FT model. Confirm the packing plan and load count with the final order configuration.

Production lead time
Every order is ready for factory pickup within 30 days.

Four-unit container loading diagram
Loading diagram · Positions 1–4

03 / TECHNICAL SPECIFICATIONS

20FT technical specifications

Reference configuration from the product specification. Final scope follows the approved project drawings and quotation.

Light-gauge steel framing reference
Light-gauge steel framing · Reference
Dimensions and construction
External size (W × L × H) 2,600 × 5,900 × 3,880 mm≈ 8.53 × 19.36 × 12.73 ft
Reference gross weight 2,500 kg≈ 5,512 lb
Main frame Q235B hot-dip galvanized square steel tubing
Secondary wall framing S550/AZ150G light-gauge steel
Roof and wall envelope 0.8 mm aluminum-magnesium-manganese alloy outer skin · 50 mm PIR insulation
Floor system 18 mm bamboo-wood subfloor · 6 mm SPC finish
Windows and skylight Thermally broken aluminum windows with 5+9+5 insulating glass · 600 × 600 mm skylight
Interior configuration

Discuss the L-shaped kitchen with quartz countertop, bathroom with shower screen, loft railing and stairs, and deck options as part of your project package.

What to confirm for your site

Share the destination, site conditions, unit count and intended use so ANTENG can review the configuration, packing and site-specific design requirements.

04 / PROJECT ENQUIRIES

Plan your cabin project.

Share your project location, unit count and preferred layout. ANTENG can review the configuration and prepare an EXW quotation.

Factory pickup within 30 days for every order.

Contact ANTENG
ANTENG / RESORT CABINSArchitectural renderings are for configuration reference.Back to top ↑